dji RONIN RavenEye Guide De L'utilisateur page 6

Method 2: use RavenEye with Ronin-S or Ronin-SC (Ronin-S is used as an example below)
1. Attach the image transmitter to the camera.
2. Connect the HDMI port of the image transmitter to the HDMI port of the camera using the provided HDMI cable
according to the camera model.
3. Connect the shutter control port of the camera to the RSS camera control port of the image transmitter or to the
RSS camera control port of the gimbal. If connected to the RSS camera control port of the image transmitter,
the camera can only be controlled in the Ronin app. The buttons on the gimbal cannot control the camera. If
connected to the RSS camera control port of the gimbal, the camera can be controlled using the buttons on
the gimbal as well as in the Ronin app.
Refer to the official DJI website for the most updated Camera Compatibility List and DJI Ronin
RavenEye Image Transmission System Compatibility List to select the proper HDMI cable and camera
control cable.
The gimbal needs to be balanced after mounting RavenEye.
When used with Ronin-S or SC, you can use the Ronin app to control the camera and access
the camera view. Gimbal movements cannot be controlled and ActiveTrack and Force Mobile are
unavailable.
4
HDMI