THIS PRODUCT IS NOT A TOY. IT IS NOT INTENDED TO BE USED BY CHILDREN.
For your safety, always read and understand the Use and Care Manual before attempting
to use any electrical appliance.
1.
Carefully unpack the popcorn popper and all parts. Remove all packaging materials,
including any stickers or labels.
2.
Hand wash the cover and lid in warm soapy water. DO NOT SUBMERGE THE
PLUG OR THE POPPER IN WATER OR ANY OTHER LIQUID. Rinse and dry
thoroughly.
3.
To clean the interior and exterior surfaces of the popper, wipe and clean with a
soft dry cloth. NEVER IMMERSE THE POPPER OR CORD IN WATER OR ANY
OTHER LIQUID.
4.
Position the popcorn popper on a dry, level, heat-resistant surface.
5.
It is recommended to operate this appliance on a separate outlet and circuit from
other appliances to avoid overloading the circuit.
1.
Make sure the popper is unplugged, all switches are in the off position.
2.
Remove plastic cover from the popping bowl. Set popping bowl aside.
3.
Add 1 scoop of oil (1 tablespoon of vegetable, canola, corn, peanut or safflower oil)
and 1 scoop of popcorn kernels (¼ cup). NEVER fill the popper with more than ¼
cup popcorn kernels.
4.
Place clear popping bowl on popping base.
NEVER pop corn with the plastic cover on the popping bowl.
5.
Plug into a 120V outlet, preferably on a separate outlet from other appliances to
prevent the circuit from being overloaded.
6.
Turn the switch to the ON position. The stirrer will begin to rotate and popper base
will begin to heat.
7.
In a few minutes, the corn will begin to pop. Each batch will yield between 6 and 8
cups of popped popcorn.
8.
When you no longer hear corn popping, the popping is complete. Turn the POPCORN
switch to the OFF position and unplug. Place the plastic vent cover on the popping
bowl before flipping. Carefully grasp the handles of the popping base and clear
popping bowl at the same time. Flip over paying attention to hold top cover secure.
Set bottom base aside and allow to cool.
4
BEFORE FIRST USE
HOW TO USE