DOREL Living DL275E Mode D'emploi page 6

DINETTE SET
DL275E
STEP 2
Place the tabletop (I) upside down on a flat, smooth surface. Place previously
assembled table frame upside down onto tabletop and center the frame onto it.
Use screwdriver (not included) to install screws (4).
NOTE: Screws (4) will make their own holes. Do not use power tools and do
not over tighten screws.
Use these round markings to
align the table frame. The
4
screws are self-drilling and
will make their own holes
.