imilab IMI Home 1080P Global Mode D'emploi page 7

number of horizontal surfaces, such as a writing desk, dining table,
mounting.
Mounting the Security Camera on a Wall
1. Drill two holes on the wall by using the base of the security
camera as a template. It is recommended that you mark the
locations of the holes with
a pencil before drilling. The
diameter of each hole is
approximately 6 mm, and the
depth is approximately 25 mm.
2. Insert the two plastic anchors into the holes on the wall.
3. Make sure to position the base unit so that the arrow is pointing
up. Secure the base unit in place by tightening the screws into the
plastic anchors.
EN-4