Remote Control; Working Principle - Nilox DOC skate Mode D'emploi

REMOTE CONTROL

DOC SKATE is controlled entirely through a remote control.
6)Accelerator/Brake
7)Speed changer
8)USB port for charging
USING DOC SKATE
DOC SKATE is a self-balancing electric skateboard.
Easy to use and entertaining, but most importantly it is environmentally friendly.

WORKING PRINCIPLE

DOC SKATE uses advanced technology to maintain balance.
Thanks to a gyroscope, an accelerometer and an algorithm for their combined use, DOC
SKATE offers an impression of "floating" on the surface.
Through the PID traction control, the drive applied to the one rear wheel is easily
transmitted and distributed to the 4 wheels of DOC SKATE.
The maximum speed DOC SKATE can reach is 20 km/h. Its gyroscope and accelerometer
allow easy balancing, suitable even for less experienced users.
WHEN GOING ROUND CURVES SLOW DOWN CONSIDERABLY TO AVOID BEING
THROWN OFF THE BOARD BY CENTRIFUGAL FORCE.
FUNCTION MODE
POWER ON / OFF
When it is off, press the PWR (5) button to switch it on. The battery status signal will light up
and a sound signal will be emitted.
EN
1)Battery status led
2 ) On/Off
3)Binding button
4)Forward/back button
5)Remote
status signal
5
control-skate binding