Product Operation - RS RDHC-110 Guide D'utilisation

Product Operation

Press this button while the screen light is ON. The unit will automatically enter continuous mode. The display screen will show the environmental
humidity and the compressor will be on. After the fan runs for about 3 seconds; press this button again. The compressor will stop and the
display screen will show "- -". The unit will be in standby mode with the fan running for another minute before stopping.
Hold down this button for 3 seconds and release. The Timer light will turn 'ON'. Press "MINUS" and "ADD" (1-24) to set the start time. When
the count down is over, the fan and compressor will start.To power off the unit, hold down this button until the button light powers ON.
Press "MINUS and ADD to set the stop. When the time is complete, the fan and compressor will turn off. Press this button for 3 seconds to show
the current temperature After 10 seconds, the display will return to show the current humidity. Continue to hold this button to show the current temperature.
The humidity can be increased by increments of 5 %RH during normal mode. Hold this button for 1 second to increase the humidity.
10