Connecting Peripherals - Gigabyte GA-Z77N-WIFI Consignes D'installation

Step
7
Connecting Cables to Internal Connectors
7-1 Connect cables to internal connectors and headers on the motherboard, including IDE/SATA
connectors, and front panel audio, USB, IEEE 1394 headers, etc.
7-2 Attach the front panel module (differs depending on the case design, consisting of power
indicator, hard drive activity indicator, speakers, reset switch, power switch, etc.) from the case
to the front panel header (F_PANEL) on the motherboard.
+MSG-
2
1
+HD- -RES+
Front Panel Header
(Note)
Step
8

Connecting Peripherals

Back Panel of the Case
Power Supply
PS/2 Keyboard Port
DVI-D Port
HDMI Port
eSATA Port
IEEE 1394 Port
Audio Jacks
Pin Assignments A: Pin Assignments B:
+PW- +SPEAK- +MSG- +PW-
+HD- -RES+
NC
The pin assignments for the front panel header may differ by model. Refer
to the motherboard user's manual for the actual pin assignments.
Once the steps above have been completed, connect
Power Switch
the peripheral devices to the computer, such as the
Power Cord Connector
keyboard, mouse, monitor, etc. Then connect the power,
PS/2 Mouse Port
turn on the system, and install all required software.
D-Sub Port
S/PDIF Connector
USB Ports
RJ-45 LAN Port
External Graphics Card
- 4 -
MSG: Message/Power/Sleep LED
PWR: Power LED
+SPEAK-
PW: Power Switch
20
SPEAK: Speaker
19
HD: Hard Drive Activity LED
RES: Reset Switch
-CI+ +PWR-
CI: Chassis Intrusion Header