Crayon Setup Guide for Schools
PRODUCT SETUP
To start using Logitech Crayon, simply turn on and draw No software downloads or pairing required Here are some tips
to get started:
1 Make sure you are using an iPad
2 Make sure iPad is updated to iOS 11 4 or above To check your iOS version, go to iPad Settings → General → Software
3 Disconnect any previously connected digital pencils, such as Apple Pencil
Settings → Bluetooth → Select the device you want to disconnect If you do not want to forget other digital pencils,
simply turn your Bluetooth
4 Press the power button for 1 second If the LED turns green, you're ready to go If LED turns red, charge Crayon
before use
SOFTWARE UPDATES
Updating the iOS on your iPad may affect your experience with Crayon If you notice changes in functionality, simply follow
these steps:
1 Download Logitech Crayon software update at
2 Connect Logitech Crayon to laptop via lightning cable
3 Follow the prompts to update software
There is no limit to how many Crayons you can connect at one time The firmware update app can update 8 devices
at a time Every update takes about 2 minutes To get notifications about software updates, product tips, and more,
visit https://support.logitech.com/product/crayon/register
USE
• Use with hundreds of Apple Pencil compatible apps, which are downloadable in the App Store
• Logitech Crayon is not pressure sensitive, so there is no need to press down hard on the iPad
• Do not remove, chew, or rip off Crayon parts, such as cap or tip Damaging Crayon in this manner will void the warranty
HOW TO CHARGE
1 Flip open the cap
2 Insert lightning cable
3 Connect cable to a power adapter or computer to charge
It takes about 30 minutes to charge Crayon from 0 to 100%
Note: Crayon will not work while charging.
(6th generation) This is the only device that is compatible with Logitech Crayon
®
off before using Crayon
®
https://support.logitech.com/product/crayon/downloads
, prior to using Crayon by going to iPad
®
English
3