Klarstein MasterFresh Mode D'emploi page 42

EN
42
Setting a Start Timer
In standby mode or when on, press the SET button to set a start timer. The timer icon
appears on the display and the hour indicator blinks. The time can be set between 1-24
hours. Press the Start/Pause button and set the minutes. Press the Start/Pause button
to return to the program selection screen. Use the select key (< >) to select the desired
program. Finally, press the Start/Pause button to start the program with a time delay.
• After the timer is active, the set time and the set program are shown alternately
(every 5 seconds) in the display.
• To cancel the timer, press the On/Off button. The unit automatically returns to
standby mode.
Switching on the light
Press the light/child lock button to turn on the light for 3 minutes. Press the button again
to turn off the light.
Parental Lock
When a program is running, press and hold the Light/Parent Lock button to turn on the
childlock. Now all buttons are inactive until you press and hold the button again.
Low Water Protection
When a program is started with steam and the appliance detects a lack of water, it stops
working and an alarm sounds. At this moment all keys are inactive. The appliance will
continue working as soon as the water in the tank has been refilled.
Protective Mechanisms when the Oven Door is open
As long as the door is open, no program can be started. If the door is opened during a
program, the device stops automatically and does not continue with the program until
the door is closed again.