Klarstein MasterFresh Mode D'emploi page 36

EN
36
Note: If you select a program with
steam, the water tank symbol lights up
in the display (see picture).
During the work:
• Pause: Press the Start/Pause button to stop the unit during operation. The
working time will no longer be counted down. The display continues to
show the program data. The time display flashes and indicates that the
unit is pausing. Press the Start/Pause button again to continue with the
program.
5
• Add the time and adjust the temperature in the midway: Press the
SET button until the time delay symbol appears. At this point, the minute
display will start flashing. Use the selection keys (< >) to adjust the time
afterwards. Press the Start/Pause button and adjust the temperature
with the selection buttons (< >) OR press the Start/Pause button again to
continue with the program without adjusting the temperature.
End of Work:
• After the program process is ended, [END] appears on the display
screen, and the buzzer will beeps for 10 times, which indicates that the
cooking is completed. Afterwards, you can open the door to take out
the food or the system will automatically exit to the standby status five
minutes later.
• After the program is over or in the standby state, for a pause or stop in the
6
midway, the display screen will show the high-temperature prompt icon
so long as the Oven cavity temperature is over 50 °C and The centrifugal
fan will delay the working time for 3 minutes.
• After the program is completed with the steam function, descaling icon
will flash on the screen, which remind the user to take out the water tank
and drain the water in the evaporator, and then pour away the residual
water from water holder. This icon will flash for 1 minute.