After Each Operation - Kärcher Inno-Foam-Set Mode D'emploi

Operation
 Hang the suction hose on the injector
intot the detergent can.
 Operate the high-pressure cleaner in
the normal way.
1 High pressure
2 Foam
3 Lever
 Inno-Foam set: Set the lever of the re-
versible spray pipe to foam setting.
Note:
If you are using a Servopress gun, set it to
full water quantity.
Inno-Foam set: Always set the lever on the
reversible spray lance to the end position.
 Pull the lever on the handgun.
 Align the flat foam jet by turning the noz-
zle casing.
 Adjust detergent dose on the injector.
A Adjustments
B Detergent dosing in %

After each operation

 Set the detergent dosage on the injec-
tor to "0".
 Rinse the foam nozzle with clear water
for 2 minutes.
ATTENTION
If the foam nozzle is not rinsed after each
use, this can lead to gumming and in-
creased wear and tear.
– 3
EN 9