3G Module - chiliGREEN W251BZQ Guide Utilisateur Concis

3G Module

If you have included an optional 3G module in your pur-
chase option, follow the instructions below to install the
USIM card (which will be provided by your service pro-
vider), and then run the appropriate application supplied
with your module.
USIM Card Insertion
1. Turn off the computer, and turn it over and remove the battery
1
(slide the latches in the direction indicated below and slide
the battery out).
2. Locate the SIM card cover and loosen screw
3
the SIM card cover .
1
3
Figure 8 - Battery & SIM Card Cover Removal
3. Insert the USIM card as you would into your mobile phone.
4. Slide the SIMLOCK towards the hinge (in the direction to the
arrow illustrated in
it up.
5. Insert the USIM card and close the SIMLOCK.
2
and remove
6. Lock the SIMLOCK by pushing it in the direction of the arrow in
Figure 10
2
7. Replace the cover, screw and battery.
Figure 9) in order to release the lock and lift
Figure 9 - Unlock the SIMLOCK
until it clicks into the lock position.
Figure 10 - Lock the SIMLOCK
17