Warn Industries 85635 Instructions D'installation page 5

VI. INSTALLATION
1. If Warn chassis skid plate kit PN 85635 is
already installed, skip to step 8.
2. Remove factory skid plate, if applicable.
3. Place rear skid plate (A3) into position. Loosely
install fasteners (B1) in (4) threaded locations.
See Figure 1.
Note: Fasteners should be kept loose to allow skid
plates to be aligned for best fit after all skid
plates are in place.
4. Place rear mid plate (A2) into position. Loosely
install fasteners (B1) in (8) threaded locations.
See Figure 2.
5. Place nut clips (B3) onto sway bar mount on
vehicle frame. See Figure 3&4.
WARN INDUSTRIES
©2010 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 5
Figure 1
Figure 2
Figure 3
85636A1