PNI House 900 Manuel D'utilisation page 19

If the procedure was successful you will be able to see the image
from the device on the screen and the Online status.
Notes:
Use Smartlink option only after powering the device
Ÿ
Because of the complex auto-configure procedure and interferences you
Ÿ
will maybe need to try the procedure a few times before succeeding Start
the procedure again after resetting the device.
Smartlink option does not support Wi-Fi 5G
Ÿ
Reset procedure: press the reset button for 10-20 then wait 60 sec for the
device to restart.
LAN connection method :
Power the outdoor unit
Ÿ
Connect the outdoor unit to the local LAN network (trough a router or
Ÿ
switch) using an ethernet cable
Make sure the phone is connected to the same network as the outdoor unit
Ÿ
(wireless router).
Open App on phone
Ÿ
The app will look and find the devices in the same network automatically
Ÿ
Select the device
Press + button to add the device then insert a name for it and it's access
Ÿ
password (default password is 123123). Select "Save".
If the procedure was successful you will be able to see the image from the
Ÿ
device on the screen and the Online status.
Note: Repeat the procedure if it did not work.
19
EN