Configuration Procedure - sauermann LoRa TrackLog Guide De Démarrage Rapide

Configuration procedure

English
TrackLog Gateway's Network Management Configuration
Changing from DHCP to Static IP
This procedure describes the different steps to follow in order to modify the TrackLog
gateway's network management, from DHCP to static IP.
Sauermann hardly recommends not to perform any modifications in the gateway's
configuration other than the explained in this document. The user is fully responsible
for the actions made on the device's configuration and the eventual impact on the
TrackLog data loggers that are connected to the specific gateways. Sauermann declines
any liability derived from any configuration modifications.
Prerequisites
• This configuration must be only made by trained staff.
• The TrackLog gateway must be connected to the Internet using a server/router.
• This procedure requires a PC connected to the same LAN as the TrackLog gateway.
• This procedure requires the specific IP address that shall be used by the TrackLog
gateway in order to connect with the TrackLog Cloud.
Step 1
Using a web browser in a PC connected to the same LAN as the TrackLog gateway,
type the current TrackLog gateway's IP address on the address bar and click enter.
(1)
The gateway's configuration tool is now opened and the Home screen is displayed.
Step 2
Enter the following credentials and click on "Login":
ID: Sauermann
Password: Sauermann#24
Your company's IT department will be able to provide this IP address.
(1)