Wahl 3615 Mode D'emploi page 13

Product description
Description of parts (Fig. 1)
A Protective cap
B Shaver foil
C Shaving head with shaver foil
D Cutter
E On/off switch
F Charging indicator
G Appliance socket
H Mains cable with small appliance plug
Technical data
Hand-held appliance
Drive: DC motor
Battery: NiMH battery
Battery operating
time: up to 45 minutes
Dimensions
(WxHxD): 46 x 100 x 20 mm
Weight: approx. 90 g
Emission sound
pressure level: max. 63 dB(A) @ 25 cm
Vibration: < 2.5 m/s²
Ambient
temperature: 0°C – +40°C
The appliance is safety insulated and radio
screened. It meets the requirements of EU
Directive 2014/30/EU regarding electromag-
netic compatibility and Low Voltage Directive
2014/35/EU.
Operation
Charging the battery
· Before the appliance is used for the first
time, it should be charged for 16 hours.
· Switch off the appliance using the on/off
switch (Fig. 3ⓑ).
· Plug the small appliance plug into the
appliance socket (Fig 2ⓐ).
· Plug the mains cable into the mains
socket (Fig 2ⓑ).
· During charging, the green charging indi-
cator is illuminated.
· For the appliance to charge to full capac-
ity, it should take around 8 hours.
· Note: In order to ensure a long operating
life of the battery pack, it should always
be completely empty prior to recharging.
Battery operation
· Switch on the appliance using the on/off
switch (Fig. 3ⓐ) and, after use, switch it
off again (Fig. 3ⓑ).
· When the batteries are fully charged, the
appliance can be used for up to 45 min-
utes without mains connection.
Foil shave
The shaving system perfectly adjusts to
the contours of the face as well as the chin
and the neck area to give you an optimum
shaving result. Prior to shaving, it is recom-
mended to clean the face and neck area
thoroughly and to pat it dry.
· Gently press the shaver upward against
the skin surface and shave against the
direction of the beard growth (Fig. 9).
At the same time, pull the skin tight
with your free hand so that the stubble
stands up.
· Avoid too much pressure on the shaver
foil; this could lead to foil breakages.
· Use the protective cover when the appli-
ance is not in use.
· The skin must get used to the foil shave.
Generally, this takes 2 – 3 weeks.
Maintenance
Cleaning and care
· Do not immerse the appliance in water!
· Disconnect the mains cable from the
mains power-supply before cleaning the
appliance.
ENGLISH
13
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar