Conrad Aiptek h500 Mode D'emploi page 10

Table des Matières

Publicité

6.
Salt or seawater may cause severe camcorder damage.
7.
Do not drop, knock, or shake the camcorder. A rude behavior
of using the camcorder may damage the internal electronic
circuit board or deform the lens shape.
8.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the camcorder.
9.
Finger grease may be left on the camcorder lens and will
result in unclear images or videos. To avoid this problem, be
sure to clean the camcorder lens before taking pictures or
recording videos. You should also clean the camcorder lens
on a regular basis.
10.
If the lens is dirty, use a lens brush or soft cloth to clean the
lens.
11.
Do not touch the lens with your fingers.
12.
If a foreign substance or water gets in your camcorder, please
turn the power off immediately and disconnect the batteries.
Next, remove the foreign substance or water and send it to
the maintenance center.
13.
Whenever there is data in the external memory card, you
should make a backup copy to a computer or disc. So, you
can have a backup solution if data loss occurs.
14.
All original accessories are designed only for use with this
camcorder model you purchased. Do not use these
accessories with other camcorder models or camcorders of
other brands to avoid unpredictable danger or damage.
15.
Before initial use of a memory card, always use the
camcorder to format the card first.
16.
Remember to slide the write-protect tab (if available) to the
unlock position. Otherwise, all data (if any) on the memory
card is protected and the card cannot be edited or formatted.
10

Publicité

Table des Matières
loading

Table des Matières