Alphacool CHILLER 2000 EISZEIT Mode D'emploi page 11

Settings - example of use
Switch to constant temperature mode
(1) Hold down  + SET for 5 seconds, until it shows "0". Set the value with  and select the password you have set (Factory default is 8).
Press SET; if the password is correct the display will show „F0" and you will be in the settings menu. (Display D1 will blink to show parameter
mode) If the password is incorrect, you will be returned to the temperature display.
(2) In the settings menu, press  to reach menu point "F3". Press SET to apply settings. The display will read "1"(Intelligent mode). With , change the
value to "0" (constant temperature mode).
(3) Confirm your selection with SET to save your selection and return to the settings menu
Or
Use RST to save your settings and return to the home screen.
If you do not press any keys within 20 seconds, you will automatically leave settings mode without saving.
Set water temperature - in constant temperature mode
(1) The heat exchanger is running in constant temperature mode.
(2) Press SET; the display will now read "F3". Change the value with  to "F0" and confi rm your selection with SET.
(3) The set temperature value will be displayed. Using , set this value to your liking.
(4) Confirm your selection with SET to save your selection and return to the settings menu.
Or
Use RST to save your settings and return to the home screen.
If you do not press any keys within 20 seconds, you will automatically leave settings mode without saving.
11