Device Initialisation (Mac Environment) - Kingston DataTraveler 4000 Mode D'emploi

Insert the DT4000 into an available USB port on your notebook or
desktop and wait for the Mac operating system to detect it. When it
does, you will see a DT4000 volume appear on the desktop, as seen in
.
Figure 6.1
1. Double-click the DT4000 CD-ROM icon.
2. Double-click the Mac folder found in the window displayed in
.
Figure 6.2
3. Double-click the DT4000 application icon found in the window
displayed in
Figure 6.3
Figure 6.2 – DT4000 contents

Device initialisation (Mac environment)

Document No. 48000127-001.A04
. This will start the initialisation process.
DataTraveler
Figure 6.3 – DT4000 application
®
4000
Figure 6.1 – DT4000
Page 12 of 28