Safety And General Information; Product Description - SFA POLARIS PVL 2300 Mode D'emploi

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, under-
stand, and follow the information provided with and on
this lift. The owner and operator of this equipment shall
have an understanding of this lift and it's safe operating
procedures before attempting to use. The owner and
operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions
and safety information shall be conveyed in the opera-
tor's native language before use of this lift is authorized.
If any doubt exists as to the safe and proper use of this
lift, remove from service immediately. Inspect before
each use. Do not use if broken, bent, cracked or dam-
aged parts are noted. Any lift that appears damaged in
any way, or operates abnormally shall be removed from
service immediately. If the lift has been or is suspected
to have been subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue
use until it has been examined by a Polaris authorized
service center. It is recommended that an annual inspec-
SPECIFICATIONS
Base Size (L x W)
70-7/8" x 36-1/4"
Lift Platform
Leg Extensions
Lift Surface Capacity
Platform 2300 lbs.
Release
Knob
Figure 1 - Model 2830425 Nomenclature
tion be done by qualified personnel. Labels and Opera-
tor's Manuals are available from the manufacturer (see
Replacement Parts, pg. 6).

PRODUCT DESCRIPTION

The Polaris Vehicle Lift is specifically designed to lift, and
support, up to rated capacity loads consisting of a single
vehicle whose frame is compatible with the lifting plat-
form. Incompatibility is evident when the loaded vehicle
wobbles, feels unstable, and/or does not sit securely on
the lift platform. This product is NOT suitable for lifting,
leveling and/or positioning automobiles, trucks, SUV's
or conveyances other than those specifically listed and
approved above. This product is NOT suitable for lifting,
leveling and/or positioning houses, construction trailers
and dwellings in general. This product does not contain
independent lifting devices, but is designed to be perma-
nently assembled. The Hydraulic Unit is not to be used
independently of the lift.
Min. Height Max. Height
6-1/2"
Crosshead
Assembly
Locking Swivel
Casters
Height
Locking Lever
2
32"
Ram
Oil Filler
Plug
Air Operated
Hydraulic Unit
Air
Coupler
Air
Motor