Telcoma Automations PASSO Instructions Pour L'installation page 45

GB
CHARACTERISTICS
The digital selector PASSO is a device that activates relays by introdu-
cing codes that can be made up from 1 to 8 numbers. It is the ideal de-
vice for places where a safe control is required without having to have
uncomfortable remote controls or keys in the pocket.
The device is comprised of two units that communicate to one another
by means of two wires
Control unit – key pad -
the unit, which is installed in a location accessible to the user, includes
10 keys numbered from 0 to 9 and a # confirmation key that are backlit
for night vision. The commands are also signalled by a red LED and
buzzer.
Receiver unit
the unit, installed in a protected location, is contained in a small box
with two clean contact relay outputs. The relay outputs can be three
types:
·
Pulse-type (activation of the relay for one second)
·
Step-by-Step
·
Timed (programmable from 2 to 255 seconds)
(fig.1)
(fig.2)
45