Two Treatment Modes: Stamp & Flash And Slide & Flash; Recommended Treatment Schedule; Initial Phase - Philips Lumea BRI861 Mode D'emploi

Recommended treatment schedule

Note: Do not use any pencil or pen to mark the
areas to be treated, as this may cause side
effects to your skin.
Note: Flashing the same area twice does not
improve the effectiveness of the treatment, but
increases the risk of skin reactions.
9 When you have finished the treatment, press
and hold the on/off button for 2 seconds to
switch off the device. Remove the adapter from
the wall socket.
Two treatment modes: Stamp & Flash and
Slide & Flash
Your Philips Lumea has two treatment modes for
more convenient use on different body areas:
- The Stamp & Flash mode is ideal to treat small
or curvy areas like knees and underarms. Simply
press and release the flash button to release a
single flash.
- The Slide & Flash mode offers convenient use
on larger areas like legs. Keep the flash button
pressed while you slide the device over your
skin to release several flashes in a row.
Note: The device needs about 2.9 seconds in
between two flashes.

Initial phase

23
English