Product Specifications - F.F. Group DH 5MX PRO Notice Originale

Masquer les pouces

Table Des Matières

Table des Matières

DH 5MX PRO

Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

Hold power tool by insulated gripping surfac-

es, when performing an operation where the

cutting accessory may contact hidden wiring or

its own cord. Cutting accessory contacting a "live"

wire may make exposed metal parts of the power

tool "live" and could give the operator an electric

shock.

Wear a dust mask. Do not inhale the harmful

dusts generated in drilling or chiseling operation.

The dust can endanger the health of yourself and

bystanders.

Under normal operation, the machine is designed

to produce vibration, the screws and bolts can

come loose, causing a breakdown and accidents.

Check tightness of them carefully before running.

In cold weather or a long time tool not be used,

please keep the tool running without load a few

minutes to warm up the grease inside, otherwise

hammering function is difficult to get.

Be sure you stand stably and no one is below when

you using tool is in high location.

Hold the tool firmly with two hands.

Don't touch any moving parts.

Don't leave the tool running itself, operate tool

only when hand-held.

Don't point the tool to anybody for the bit could

fly out in case.

Don't touch the bit or parts close to the bit imme-

diately after operation, they may extremely hot

and could burn your skin.

Any damage and abnormal happen, please stop to

use immediately and disconnect it, ask authorized

service center to check and repair.

Parts replace: Only original parts can be used to

replace by authorized service center.

Special attention to voltage: Before connect the

power tool, please make sure the rated voltage on

the tool can match the power supply, otherwise

the power tool may be damaged and cause injuries.

Don't wipe plastic part with solvent: Solvent

such as gasoline, thinner, alcohol etc. these kind

of chemical material, are not allowed to use, wa-

ter or soap are recommended!

In case of damages the replacement of the plug or

the supply cord shall always be carried out by the

manufacturer of the tool or his authorized service.

If the replacement of the supply cord is necessary,

this has to be done by the manufacturer or his

agent in order to avoid a safety hazard.

Use suitable detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explosion.

Penetrating a water line causes property damage

or may cause an electric shock.

When working with the machine, always hold

it firmly with both hands and provide for a se-

cure stance. The power tool is guided more se-

cure with both hands.

VIBRATION SAFETY

This tool vibrates during use. Repeated or long-

term exposure to vibration may cause temporary

or permanent physical injury, particularly to the

hands, arms and shoulders.

TO REDUCE THE RISK OF ANY VIBRATION-RE-

LATED INJURY:

First be examined by a doctor and then have regu-

lar medical check-ups to ensure medical problems

are not being caused or worsened from use. Preg-

nant women or people who have impaired blood

circulation to the hand, past hand injuries, nervous

system disorders, diabetes, or Raynaud's Disease

should not use this tool. If you feel any symptoms

related to vibration (such as tingling, numbness,

and white or blue fingers), seek medical advice as

soon as possible.

Use tools with the lowest vibration when there is

a choice.

Take vibration-free breaks during each day of work.

Grip tool as lightly as possible (while still keeping

safe control of it). Let the tool do the work.

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the ma-

chine's rating plate are compatible with the power

supply you intend to connect it to.

This appliance is Class II* and is designed for connec-

tion to a power supply matching that detailed on the

rating label and compatible with the plug fitted. If

an extension lead is required, use an approved and

compatible lead rated for this appliance. Follow all

the instruction supplied with the extension lead.

*Double insulated: This product requires no

earth connection as supplementary insulation

is applied to the basic insulation to protect

against electric shock in the event of failure of

the basic insulation.

GUIDELINES FOR USING EXTENSION CORDS

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will

draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

Always replace a damaged extension cord or have

it repaired by a qualified person before using it.

Protect your extension cords from sharp objects,

excessive heat and damp/wet areas.

Use a separate electrical circuit for your tools. This

circuit should be protected with the appropriate

time-delayed fuse. Before connecting the motor to

the power line, make sure the switch is in the OFF

position and the electric voltage is rated the same

as the voltage stamped on the motor nameplate.

Running at a lower voltage will damage the motor.