Headphone Connection - MAJORITY OAKINGTON+ Guide D'instructions

Settings
EN
Settings: Additional Functions
System Reset
Press the 'Menu' button (Rem.8) on the remote control.
Use the 'Up' (Rem.9) and 'Down' (Rem.11) buttons to scroll to "System
Settings" and press the 'Play/Pause' button (Rem.26) on the remote
control to select. Press the 'Up' (Rem.9) and 'Down' (Rem.11) buttons
to scroll to "Factory Reset". Use the 'Next' and 'Previous' (Rem.25/10)
buttons to scroll between "Yes" or "No" and Press the 'Play/Pause' button
(Ref.26) to confirm selection.
SW Version – Software Version Display
Press the 'Menu' button (Rem.8) on the remote control. Use the 'Up'
(Rem.9) and 'Down' (Rem.11) buttons or the Navigate/OK dial (Ref.12)
to scroll to "System" and press the 'Play/Pause' button (Rem.26) on the
remote control to confirm.
Then use the 'Up' (Rem.9) and 'Down' (Rem.11) buttons to scroll to
"Software Version" and press the 'Play/Pause' button (Rem.26) on the
remote to confirm. The software version will be displayed.

Headphone Connection

Connect your headphones to the socket at the rear of the unit (Ref.16).
The unit can support Mobile Phone headphones. Please note that the
unit can not support Bluetooth/wireless earphones.
31