Itec iViewer 03 ECO Manuel D'instructions page 9

13 | 03 | 2020
iViewer 03 ECO®
warning
Make sure you assemble the door bell camera carefully.
DO NOT pull or fold the camera wire. lf the camera wire is pulled or folded, this could damage
the product.
When fitting the door viewer camera, first unscrew the camera barrei and insert the door
viewer camera into the peephole with the arrow points up. After the camera is well positio-
ned, screw up the locking barrei from inside doer. DO NOT rotate the camera from out side
door, this could damage the camera. Also DO NOT rotate camera when disassembling this
product.
CORRECT ASSEMBLY
Do not rotate the out
door camera when
assembling
Please do not twist the door viewer or the monitor after connecting cable.
INCORRECT ASSEMBLY
Rotate the out door
camera when
assembling
www.itec.com.pt
Pull or fold the
camera wire
9