Itec iViewer 02 HD Manuel D'instructions page 17

13 | 03 | 2020
iViewer 02 HD®
The recorded photo and video format:
- The photos are taken in JPEG format, and the videos are taken in MP4 format. Users can scan and edit these
photos and videos on windows PC.
SPECIFICATIONS:
WARNING
Make sure you assemble the door bell camera carefully. DO NOT undo the camera or pull the camera wires.
If the camera wires are pulled or folded this could damage the product.
Correct Assembly:
When fitting the door bell camera, first qunscrew the camera barrel and then peel of the 3M sticker from the
back of the camera. (Fig1)
Stick the camera to the outside of the door making sure the doorbell is at the bottom. (Fig2)
Incorrect Assembly:
DO NOT fit the door bell camera without sticking to the door using the 3M sticker.
This would cause the door bell to rotate and will damage th ewires and may cause the unit to fail. (Fig3)
* Please do not twist the door viewer or the monitor after connecting cable.
Door thickness
Door barrel diameter
Camera
LCD Screen
Power
Memory card
Photo volume for 1GB
Infrared wavelength
Size
Weight
Fig.01
www.itec.com.pt
38~110mm
14-26mm
3 Megapixels HD Def.
4.3"TFT
4 x AA batteries
Micro SD card (TF), max 16GB
12000pc (lab condition, the actual volume
could differ under different circumstances)
940nM
139 (C) x 80(L) x 19.8(H)mm
190g
Fig.03
Fig.02
17