Home Decorators Collection 257-188-213 Guide D'utilisation Et D'entretien page 8

Assembly (continued)
7
Attach the media shelf
□
Line up and insert the connectors on the left and right
inside panels (E & F) and the media shelf (G) with the holes
in the front panel assembly as indicated.
□
Line up the unthreaded holes in the top of the media shelf
assembly to the holes in the top (A) and insert four long
bolts (DD) through four washers (EE). Turn the long bolts
(DD) clockwise to tighten. Do not strip the long bolts (DD)
by overtightening.
□
Insert bolts (AA) into the holes in the connectors on the
left and right inside panels (E & F) and the media shelf (G).
Turn the bolts (AA) clockwise to attach the media shelf
assembly to the front panel assembly. Do not strip the
bolts (AA) by overtightening.
8
Attach the back panel
□
Locate the back panel (L) and line it up to the back of the
media console with the finished side facing in.
□
Insert and tighten 17 back panel screws (FF) to attach the
back panel (L) to the mantel assembly.
A
8
E
G
F
AA
L
FF
EE
DD