How To Check The Time; Acceptance Tests; Inventory; Physical Inspection - Kannad PROV-CARBON Manuel Utilisateur

USER MANUAL / MANUEL UTILISATEUR
<PM16 1>
<PM17 1>
<PM19 200>
<PM20 10>
<PM21 25>
<PM22 200>
<PM23 1>
<PM24 40>
<PM25 2000>
<PM26 1000>
]
As you can see, the responses are of the form:
• PM parameter number, value.
You can also read the values of the parameters individually using commands of the form
? PM X
where X identifies the parameter. Each parameter is identified by a parameter number corresponding to a
parameter name. These are summarized for your reference in
For example, to verify the value of the ascent sampling period, send the command:
? PM 7
PROV-CARBON will respond:
<PM7 10>
]
where 10 is the sampling period in ascent (refer to

5.6. How to Check the Time

Connect the PC to the float using the RS232 interface cable (refer to section
Ask PROV-CARBON to display the time stored in its internal clock by sending the command:
? TI
(Do this by typing the characters ? TI followed by the Enter key.
PROV-CARBON will respond:
<TI a2007 m4 j12 h14 m41 s41>
]
with the time in the format YYYY/MM/DD hh:mm:ss

5.7. Acceptance Tests

Immediately upon receipt of the PROV-CARBON float, you should test it to confirm that it is complete,
correctly configured and has not been damaged in shipment. If your PROV-CARBON float fails any of the
following tests, you should contact KANNAD.

5.7.1. Inventory

The following things should have arrived with your PROV-CARBON float:
• This user's manual.
• RS232 interface cable (if not previously supplied).
• Test sheet.
NOTE: Disassembly of the float voids the warranty.
Check that all of the above items are present. If any are missing, contact KANNAD.

5.7.2. Physical Inspection

Upon the opening of the transport casing, visually inspect the float's general condition:
Inspect the transport container for dents, damage, signs of impact or other signs that the float has been
mishandled during shipping.
PROV-CARBON
Table 1: page
PAGE : 14 / 70
DATE : 20/12/2007
INDEX : A
REF. : DOC07220
Table 1: page 8.
8).
5.3. page 12).