Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use and maintenance instruction
3. General characteristics and conditions of use
General characteristics and conditions of use
Valve Construction
Valve Functions
Valve sizes
Materials
Connections
Air specifications
Working pressure -0,9 ÷ 10 bar
Pilot Pressure
Temperature 0 ÷ 50 °C
Storage Temperature -10 ÷ 50 °C
Flow rate 250 NL/min (F1 passo 12 mm); 500 NL/min (F2 passo 14 mm)
Mounting position
Voltage
Power consumption
Protection class (EN 60529)
Duty cycle ED 100%
Max number of solenoids
Max number of valves positions
Valves series F
Spool with seals
5/2 monostable e bistable
5/3 CC; 2x2/2 NO; 2x2/2 NC
1x2/2 NC + 1x2/2 NO
2x3/2 NO; 2x3/2 NC
1x3/2 NC + 1x3/2 NO
12 mm e 14 mm
Aluminium spool
HNBR spool seals, other seals in NBR
Brass cartridges, Technopolimer body and end-cover
Inlets 2 e 4, size 1 (12 mm) = tube Ø4; Ø6
Inlets 2 e 4, size 2 (14 mm) = tube Ø4; Ø6; Ø8
Supply 1, size 1 e 2 = tube Ø8; Ø10
Servo pilot 12/14, size 1 e 2 = tube Ø6
Exhaust 3/5, size 1 e 2 = tube Ø8; Ø10
Exhaust 82/84, size 1 e 2 = tube Ø6
Filtered air class 5.5.4 according to ISO 8573.1 (If lubrication is
necessary use only oil with max. viscosity 32 Cst.)
3 ÷ 7 bar
4,5÷7 bar (with supply pressure higher than 6 bar for 2x2/2 and 2x3/2
versions)
Any position
24 Vdc (±10%)
0,6 W per coil
IP40
24
24 (monostable)
93-7507-0014
Revision
B
Publicité
Table des Matières
