Mode Of Operation - Sticker Mule LMD03 Manuel D'utilisation Et D'entretien

10. Mode of operation

The device has two operating modes that can be selected by
pressing the button
change is signaled by a double acoustic signal):
• Automatic mode: the motor drags the roll until it is
stopped by the optical sensor which detects the pres-
ence of the label to be peeled. Once the label has been
removed, the motor restarts automatically and drags
the roll to the next label. In any case, the procedure must
be activated the first time by pressing the
• Manual mode: similar to the previous automatic mode,
but this way the restart of the motor does not occur
when the label is removed but when the button
pressed for less than 1 second.
By pressing the button
signaled by a descending sound).
14 | English
❸
for more than 2 seconds (the mode
❷
you can return to stand-by mode (it's
❸
button.
❸
is
❸
❷