Battery Charging And Installation - Victure AC700 Mode D'emploi

Battery Charging and Installation

The battery and the camera are packaged separately, so please make
sure that the battery is charged with power, inserted into the camera
before turning the camera on.
A. Battery Charging
· Connect the charger with USB cable, you can charge it with power
plug or computer. Charging with computer may be slower than with a
power adapter due to lower power output of computer USB ports.
· When the camera is charging, the red light will appear. It will disap-
pear if the battery is fully charged.
Tips: Normal full charging time is about 3 hours. Do not overcharge
the battery.
13
EN