Tools needed
Pliers
Level
BASIC REQUIREMENTS
Make sure you have everything necessary for the proper installation
•
A GROUNDED ELECTRICAL OUTLET is required. Refer to the "Electrical requirements" section on
page 18.
•
A POWER CORD for electric dryers (except for Canada).
•
GAS LINES (if you have a gas dryer) must meet national and local codes.
•
The EXHAUST SYSTEM must be rigid metal or fl exible stiff -walled metal exhaust ducting.
DV457E(G)-02836E-03_EN.indd 13
DV457E(G)-02836E-03_EN.indd 13
Cutting knife
Phillips Screwdriver
Pipe wrench
Nut drivers
(gas only)
Duct tape
Installing your dryer _13
Wrench
2012-12-04
2012-12-04
6:44:38
6:44:38