Information Codes - Samsung DV457E1 Série Manuel D'utilisation

PROBLEM
Lint on clothes
Garments still wrinkled after
Wrinkle-Care
Odors remain in clothing
after Refresh.
Water drips from the nozzle
when Steam-Care starts
Sprayed water is not visible
during Steam-Care
The drying time is too long.

INFORMATION CODES

Samsung's Smart Care, an automatic error-monitoring
system, detects and diagnoses problems at an early stage
and provides a quick and easy solution through LCD
navigation.
When your dryer has a problem, the notifi cation screen
will show the information and solution to help you better
understand what is occurring with your dryer and how to
solve the problem.
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY
tE
tE3
HE
dE
DV457E1_02836J-04_EN.indd Sec6:59 DV457E1_02836J-04_EN.indd Sec6:59
SOLUTION
• Make sure the lint fi lter is cleaned before every load. With some loads that
produce high amounts of lint, it may be necessary to clean the fi lter during
the cycle.
• Some fabrics are lint producers (for example, a fuzzy white cotton towel)
and they should be dried separately from clothes that are lint trappers(for
example, a pair of black linen pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before washing and drying clothes.
• Small loads of 1 to 4 items work best.
• Load fewer garments.
• Load similar-type garments.
• Fabrics having strong odors should be washed in a normal cycle.
• This is steam condensation. The dripping water will stop after a short time.
• Sprayed water is diffi cult to see when the door is closed.
• Please check the selected cycle, Temperature and Dry level settings. (Please
use the recommended Temperature and Drying Level.)
• Check if the Eco Dry function is enabled in the Normal or Time dry cycles.
(If the function is enabled, the drying time is extended to save energy
consumption.)
TRIGGER
The thermistor resistance is very low
or high.
The resistance of the thermistor for
the vent blockage detection is very
low or very high.
Invalid heating Temp in running the
dryer
Running the dryer with door open
ACTION TAKEN
Clean the screen or vent.
If the problem continues, call for service.
Clean the screen or vent
If the problem continues, call for service.
Call for service.
Clean the door and then restart.
If the problem continues, call for service.
Troubleshooting _59
2013-08-08 2013-08-08 4:25:49 4:25:49