Turn the dehumidifier off and disconnect the plug from the power source before cleaning.
1. Clean the Grill and Case
• Use water and a mild detergent. Do not
use bleach or abrasives.
• Do not splash water directly onto the unit.
Doing so may cause an electrical shock,
cause the insulation to deteriorate, or
cause the unit to rust.
• The air intake and outlet may get dirty
during operation, use a vacuum cleaner
or brush to clean.
2. Clean the bucket
• Every few weeks, clean the bucket
thoroughly. Partially fill the bucket with
clean water and mild detergent. Swish it
around in the bucket, empty and rinse.
NOTICE
Do not use a dishwasher to clean the bucket.
3. Clean the air filters
• To remove the filters, pull each filter
outwards.
• Wash the filters with clean water then dry.
• Re-install each filter.
• Reset the filter indicator light following
operating instructions on page 9.
CAUTION
To avoid loss of performance or damage to
the unit, do not operate the dehumidifier
without the filters.
4. When not using the unit for long time periods
• Before storing the unit and bucket, let it rest for one full day so that the system can
dry out naturally.
• Clean the unit, water bucket and air filters.
• Ensure the power cord is in the power cord storage channel.
• Nest the unit inside the bucket.
• Cover the unit with a plastic bag.
• Store the unit upright in a dry, well-ventilated area.
Fig. 14
Page 15