Cleaning And Maintenance; Thermal Protector - Waring Commercial WSG30 Manuel D'instructions

CLEANING AND MAINTENANCE

Be sure the grinder's electric plug has been removed from the outlet.
Unless you are using the grinding bowl for storage, remove the base
and empty the grinding bowl of all contents. Lock grinding bowl
into grinder base. Add ¼ cup of hot, soapy water, cover and run
continuously for 10 seconds or until all debris has been removed
from the blades. Rinse with clean water. The bowls may be hand-
washed and are dishwasher safe on top shelf only. Allow parts to
airdry. DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY
OTHER LIQUIDS.
Wipe the exterior of the motor housing and the plastic housing cover
(where the grinding bowl is positioned) with a damp cloth. Allow to
air-dry.

THERMAL PROTECTOR

For your safety, this spice grinder is equipped with a thermal
protector. Should the spice grinder overheat, the motor will
automatically shut off. Unplug the spice grinder from the electrical
outlet and let the motor cool down for 5 to 10 minutes. Once the
motor has cooled down, plug unit into electrical outlet and resume
grinding.
7