First Installation In The Bath - Drive Medical bellavita Mode D'emploi

◗

First installation in the bath

1
 Mushroom head ·  Stopper
1) First insert the rear suction cups with the
movable stoppers in front into the underside of
the baseplate.
3
 Aeration flap
2) Move the mushroom head of the suction cup
towards the small opening into its end position
by turning slightly. Ensure that the aeration
flaps point towards the rear.
2
3) Press the stopper flush into the opening in the
4) Insert the front suction cups in the same way,
Installation and use
plate from the top.
but also press the aeration flaps into the re-
cesses in the baseplate. The front suction cups
are thus automatically aerated when taken out.
English · 7