Ce Declaration Of Conformity - Jay Electronique Jump Notice D'installation Et D'utilisation

21 - CE declaration of conformity

Translated from French
The manufacturer:
Declares that the safe active repeater described in the user manual and mentioned here below:
Complies:
• With the requirements specified for the machines defined in Appendix I of the Directive 2006/42/EC regarding the alignment of the
legislations of the member states relative to machinery.
As such, the notified body No. NB 0044 :
Has issued an EC type examination n°44 205 13 1991 03 reflecting compliance with the following standards:
•
EN ISO 13849-1 (2008-12) Requirements for performance level PL e (Category 4)
•
EN ISO 13849-2 (2008) Validation
•
EN 61508-1-7 (2010) Requirements for SIL 3
•
EN 62061 (2005) + A1 (2013) Requirements for SIL 3
•
EN 60950-1 (2006) + A11 (2009) + A1 (2010)
This equipment can be used in applications up to Category 4 (PL e) according to EN ISO 13849-1 and SIL 3 according to EN 62061,
provided that the Transmitter / Receiver set working with this product is certified PL e / SIL 3.
•
With the requirements of the European Directives of the Council of Europe of March 9
of the member states, relative to radio equipment and telecommunication terminals (R&TTE 99/5/EC dated 9 March 1999) with
special reference to:
- Article 3.1a regarding the requirements relative to health and safety protection, with reference to standards EN 62479 (2010) and EN
60950-1 (2006).
- Article 3.1b regarding the requirements relative to protection with respect to electromagnetic compatibility, with reference to standards
ETS EN 301 489/-1 (V1.9.2-2012) /-3 (V1.6.1-2013) ; EN 61000-6-2 (2005) ; EN 62061 Annex E (2005).
- Article 3.2, regarding the requirements relative to proper use of the radio frequency spectrum to prevent harmful interferences, with
reference to standards EN 300 220-1 (V2.4.1-2012).
As such, the accredited body n°0573:
Has carried out testing of the above safe active repeater for Electromagnetic Compatibility (3.1b) and for compliance with the spectrum (3.2)
included in the reports n°R1309296C-E, and n°R1309296R-E.
•
With the requirements of the European Directive of the Council of June 8
in electrical and electronic equipment (RoHS) (2011/65/EU).
•
With the requirements of the European Directive of the Council of July 4
Directive (2012/19/EU).
Signatory: Responsible person authorized to compile the technical file (
And empowered to draw up the declaration on behalf of the manufacturer (
Name: Ludovic CANNAVO; Function: Certification Manager.
Place and Date: JAY Electronique ZAC Bâtie Street Champrond 38334 St Ismier France on May 22
Signature:
- 54 -
DECLARATION OF CONFORMITY
JAY Electronique
ZAC la Bâtie, rue Champrond
38334 ST ISMIER Cedex
FRANCE
JUTxxxxx
TÜV NORD CERT GmbH
Langemarckstraße 20
45141 Essen
Germany
AEMC Lab
19, rue François Blumet
ZI de l'Argentière
38330 SASSENAGE
FRANCE
signed on original
Serial number of the product on original
JUMP
th
1999, regarding the alignment of the legislations
th
2011 on the restriction of use of certain hazardous substances
th
2012 on waste electrical and electronic equipment (WEEE)
),
2006/42 Annex II § 2
).
2006/42 Annex II § 10
T940-HOM-008-Déclarations_CE_de_conformité-FR_EN_DE - revision03.doc
nd
2014.
Jump - 332970C
revision 03