Toyotomi Zibro LC-150 Manuel D'utilisation page 3

Masquer les pouces Voir aussi pour Zibro LC-150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
geneRal diRections foR Use
Below you will find the main steps to be taken for
using your heater. For more details, please refer to
the MANUAL.
1
Remove all packaging materials (Fig. A).
2
Fill the removable tank 7 (refer to Section B, Fig. D).
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment keys
(refer to Section E).
6
Switch off the heater by pressing the
As a fire precaution, the tank must be filled either when the heater has been
switched off or in another room than the room where the heater is installed.
Always ensure that the tank is closed properly after filling it at a safe distance from
all sources of heat and open flames (see chapter B).
The first time the heater is ignited it will smell like "new" for a short time.
Store all fuel containers with their original caps and seals in a cool and dark place.
Fuel ages. Use new fuel at the start of every heating season.
Only use high quality and water -free pure paraffin in accordance with local
legislation.
Before changing brands and/or types of fuel make sure that the mobile heater first
completely empties all of the remaining fuel inside the heater.
key M(refer to Section D).
key M.
4
3

Publicité

Table des Matières
loading

Table des Matières