Toyotomi Zibro LC-150 Manuel D'utilisation page 14

Masquer les pouces Voir aussi pour Zibro LC-150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
Then, use the adjustment keys O to set the minute. Press the
adjustment key M to increase the minute and the key N to
decrease the minute. Press extension/day/set S to select the
right minute.
Use the adjustment keys O to set the hour at which the
heater must shutt off.
Press the adjusment key M to increase the hour and the key
N to decrease the hour.
Press extension/day/set S to select the right hour.
Then, use the adjustment keysO to set the minute. Press the
adjustment key M to increase the minute and the key N to
decrease the minute. Press extension/day/set S to select the
right minute.
The settings for program 1 for Monday are programmed and
the display shows SET for 3 seconds.
After 3 seconds choose another day or end the setting mode
by pressing timer.
Press the "timer" key P to exit the weekly timer setting mode and return to the time and a
day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
P
O
Use the copy function if there are multiple days during one week which should have the
same setting times.
Make sure that the heater is not burning. Press the timer key
P. Use the adjustment keys O until the day of its source is
displayed in the display.
Press extension/day/set S to select.
The display shows:
4
14
S

Publicité

Table des Matières
loading

Table des Matières