Mode
Sleep
mode
FOL-
LOW
ME
IM_KAC3232_KAC3352_181220_V04_HR.indb 47
Application
• set temperature
increases by 1 °C after
30 minutes and again
by 1 °C after another 30
minutes
• temperature will be kept
for the next 7 hours and
the product returns then
to the previously set
temperature
• not available during fan
or dehumidifying mode
• This function can only
be activated via the
remote control. The
remote control serves
as a remote control
thermostat that allows
precise temperature
control at your location.
• To activate the Follow
Me function, point the
remote control at the
product and press the
Follow Me button.
• The remote control
displays the current
temperature at your
location. The remote will
send this signal to the
air conditioner every 3
minutes until you press
the Follow Me button
again.
• If the product does not
receive the Follow Me
signal within 7 minutes,
the product will exit the
Follow Me mode.
Note:
This feature is not
available in FAN or DRY
mode.
The product is intended for the following
ambient temperatures:
Mode
Temperature
AUTO
17 °C (62 °F) - 35 °C (95 °F)
auto
COOL
17 °C (62 °F) - 35 °C (95 °F)
DRY
13 °C (55 °F) - 35 °C (95 °F)
Warning
Any other conditions and locations as the
mentioned above may result in reduced
performance of the product, injuries and
damage to property.
Fig.
Setting the temperature
6
Press the
/ + or
/ – button to select a
temperature between 17 °C to 30 °C.
Fig.
Setting the fan speed
7
• Press the fan speed button FAN to toggle
between the speed settings.
• The respective indicator on the control panel
and the remote control show the current
setting.
Note:
There is no indicator for the auto speed
setting.
Air outlet adjustment
Fig.
8
The air outlet can be adjusted in any mode to
fit required needs.
• Press the oscillation button SWING
repetitively to turn oscillation on or off. The
air flap will oscillate continuously.
• To stop the air flap at a desired position
press button SWING again.
Note:
Do not move, open or shut the air flap
manually.
English
47
20/12/18 4:15 pm