Operating Time - Sartorius Option L9 Notice D'installation

Operating Time

There are three sets of configuration options in the operating menu that affect the
operating time of the built-in rechargeable battery pack:
– Automatic shutoff of the scale (in accordance with timer settings)
– Automatic shutoff of display backlighting (in accordance with timer settings)
– Timer settings for automatic shutoff of scale or of display backlighting
When automatic shutoff functions are active, the battery goes into energy-saving mode,
which extends the battery's operating time.
Automatic Shutoff: Display Backlighting
The settings for automatic shutoff of the display backlighting are configured under
"Setup" in the scale operating menu.
Configure the setting as follows for "Display backlighting" (menu level 8.8. under
"Utilit."):
– Automatic shutoff acc. to menu item 8.9. (after 2, 4, or 10 minutes without use).
– The backlighting is switched off only after the defined period has elapsed without the
scale being used (no change in load; no keys pressed).
§ Switch off the scale.
§ Switch the scale back on; during the self-test, press the ) key. Open the "Setup"
submenu in the operating menu.
Level 1 Level 2
appl
SETUP
UTILIT
Level 3 Level 4
8.
8.8.
8.8.1
8.8.2
o 8.8.3
§ Press )
§ Press k repeatedly
§ Press )
§ Press k repeatedly
§ Press )
§ Press k repeatedly
§ Press )
§ Press k repeatedly
§ Press ); Auto on "On"
§ Press k; Auto off "Off"
§ Press k; "Automatic shutoff"
§ Press ); "o" is displayed, indicating
that this item is set.
§ Press and hold ) (> 2 sec) to exit the
menu.
7 7