Generac 10 Série Guide D'installation page 4

Residential Transfer Switch Installation Guide
Automatic Transfer
Switch/Load Center with
Express Install Kit
KIT INCLUDES:
THE OUTDOOR CONNECTION BOX WITH
A
FIVE FOOT PRE-WIRED LIQUID TIGHT CON-
B
DUIT
Mounted outside the home or business nearest the
planned generator location. This is for connection to
generator controls and main line circuit breaker.
C
30 FOOT FLEXIBLE CONDUIT
Pre-wired from the automatic transfer switch with
built-in emergency load center for connection to the
outdoor connection box.
D
PRE-WIRED AUTOMATIC TRANSFER SWITCH
AND EMERGENCY LOAD CENTER
E
Installed within one (1) foot of the building's main dis-
tribution panel. This transfer switch provides smooth
and safe transition between utility and generator
power.
F
TWO FOOT PRE-WIRED CONDUIT FOR EASY
CONNECTION TO THE BUILDING'S MAIN
DISTRIBUTION PANEL
G
UL LISTED WIRE NUTS (not shown)
TOOLS REQUIRED:
Drill, drill bits, hole saw (type and length will be deter-
mined by the materials to be drilled and cut), open-end
wrenches or adjustable wrenches, socket wrenches or
nut drivers, standard and Phillips screwdrivers, sledge
hammer, level, pencil, channel-lock pliers, appropriate
gloves and safety goggles.
2
Designed with installation
cost savings in mind!
A
B
F
ITEMS TO BE PURCHASED OR SUPPLIED FOR
COMPLETE INSTALLATION:
 70 amp or 50 amp (8kW) double pole circuit breaker
(must be the same type as in the main electrical
distribution panel)
 Silicone caulk
 Fasteners (to mount outdoor connection box and
automatic transfer switch)
C
D
E