Waeco MagicSafe MS670 Instructions De Montage Et De Service page 38

_MS-670.book Seite 38 Donnerstag, 8. Mai 2008 4:55 16
Installing MagicSafe
Tools required (fig. 1, page 3)
6.1
For installation and assembly you will need the following tools:
Measuring ruler (4)
Centre punch (5)
Hammer (6)
Drill head set (7)
Drill (8)
Screwdriver (9)
To establish and test the electrical connection, the following tools are
required:
Diode test lamp (1) or voltmeter (2)
Hot air blower (10)
Crimping tool (11)
Soldering iron (optional) (12)
Solder (optional) (13)
Insulating tape (14)
Heat shrinking sleeve
Cable bushing sleeves (optional)
To secure the cable you may require additional screws and cable binders.
38
MagicSafe MS670