Safety Instructions - Samsung DW80R2031 Serie Manuel D'installation

GROUNDING INSTRUCTIONS
For a permanently connected appliance:
This appliance must be connected to grounded metal, a permanent wiring system, or an
equipment - grounding conductor must be run with the circuit conductors and connected to
the equipment - grounding terminal or lead on the appliance.
The dishwasher is very heavy. Do not attempt to move or carry a dishwasher alone. Two or
more people are needed to move a dishwasher and avoid potential injuries.
/A
If th power �� ble is dam � ged,
_ �
_
;;;;;;;; similarly qualified person in order to avoid a hazard.
�
Do not touch the power cable with wet hands.
� Do not connect another appliance to the same power outlet as the dishwasher.
Make sure to use a new water supply line. Old lines are susceptible to breakage because
they become hardened and may cause property damage due to a water leakage.
The dishwasher must be connected to a hot water supply with a temperature between 120
"F (49 "C) - 149 °F (65 "C). This temperature range provides the best washing result and
shortest cycle time. Temperature should not exceed 149 "F (65 "C) to prevent damage to
dishes.
Ensure that the water supplied to the dishwasher does not freeze. Frozen water can
damage the hoses, valves, pump, or other components.
Certified residential dishwashers are not intended for licensed food establishments
'
(NSF/ANSI Standard 184 for Residential Dishwashers)
For a full list of safety information, please refer to the User Manual.
BEFORE INSTALLING THE DISHWASHER
&WARNING
WARNING
p
r e
H
·
a
V
T 0
n u
Ot
0
- D
p
n
ot
－ D 0
p
n
ot
這
－ D
0
"
Electric Shock Hazard
Failure to follow these instructions can result in death, fire, or electric shock:
-
Electrically ground the dishwasher
-
Connect the ground wire to the green ground connector in the junction box.
-
Do not use an extension cord.
To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that
the dishwasher is completely enclosed at the time of installation
it must be
_
rd
th it
Za
e dis hw aSh · _
er
u
se
h nt
do the d hen
wn w
on
0
us
or
.
. sIV n
ex ew
ce ees o
el
g
la
ht
re � laced by the manufacturer, a service agent or
_ _
d e
St
n
g a
etl
it
y
n 。
op
e
oPe
o
r
n
d
�

safety instructions _3