koban KPAW-01 Manuel page 134

1
2
FUNCTION
Below table indicated for information about the functional
button operations.
Button
HOLD
∑
www.grupotemper.com
TRUE RMS 1000A AC WATT Clamp Meter
Infrared slot
USB Interface Cable
Operation Performed
Press HOLD to enter the Hold mode
any mode,
Press HOLD again to exit the Hold
mode to return to measurement mode, the
Meter beeps and,
Press the backlight button when needed.
Auto shut-down backlight after lighting
20secs.Press the button again, turn the
backlight off manually
At Active power (main display) + Phase
angle (secondary display) mode, press ∑
once button to sum up the current phase of
3 phase measurement result. Then carry
out second phase power measurement.
Press ∑ and hold for over 1 second to
appears and the Meter beeps.
disappears.
KPAW-01
9