For Your Safety; Electrical Connection - Atag MC311E Mode D'emploi

for your safety

GB 2
Turn the power supply off before cleaning or
repairing the appliance, preferably by removing the
plug from the socket.
This appliance may only be used for the purpose
for which it was designed, namely cooking food.
All other uses should be considered improper and
dangerous. We do not accept responsibility in the
event of damage due to improper, incorrect or
irrational use of the appliance.
NB:
Children are not aware of the dangers that can
arise when operating electrical equipment.
For this reason do not allow children to use the
microwave oven.
Your microwave oven is only safe if the door closes
properly!
Never place an object in the door opening of the
oven and make sure that the seal is always clean.
Do not use the microwave oven if there is any
damage to the door (bent), the hinges and catch
(defective or loose) or the seal.
Only use the microwave oven for defrosting and
cooking food and not, for example, for drying
clothes or paper. These can catch fire.
Switch the microwave oven off and remove the
plug from the socket if something in the oven
catches fire. Keep the oven door closed.
positioning

electrical connection

Place the microwave oven on a firm, flat surface.
Make sure that there is sufficient ventilation around
the microwave oven. Keep a 30 cm space free at
the top. At the rear and sides keep at least 10 cm
free. Do not cover the air vents.
The adjustable feet should not be removed.
Do not place the microwave oven near a heat
source.
Transmitting and receiving equipment such as
radios and televisions can affect the operation of
the microwave oven.
The appliance can also be built in. Trim frame
RM3..E is available for this purpose.
This appliance requires a mains power supply of
230 V, 50 Hz alternating current.
The appliance must be grounded and under no
circumstances should it be connected to a direct
current supply.
Place the appliance near to a grounded wall socket.
GB 3