THOMSON DSC 353G Manuel D'utilisation page 40

D - CONFIGURATION AND USE
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display one
10
or more windows and cameras simultaneously
Take a photo from the video in playback and
11
activate/deactivate sound
Type of trigger: tick the type of recordings you
12
want to search: flat (programmed), manual,
upon movement detection, by alert in general
Day you want to view
13
Position: enter the precise time from which you
14
want to view the video
To search for a video and view it:
• Click the list of cameras on the top right of the
screen or on the cameras that you wish to view.
• In the "type d'enregistrements [type of
recording]"
area,
recordings that you are searching for
• In the "date d'enregistrement [date of
recording]" area, indicate the day you want to
view
• Click "Recherche [Search]": each camera
is listed at the bottom of the screen. The
coloured areas correspond to the videos in the
computer memory:
• At the bottom of the screen, click the cameras
for which you would like to display the videos
• Use the playback controls to play, fast forward,
rewind or use the "Positionner [Position]" area
to indicate the precise time with the cursor.
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Configuration depends on the
chosen email provider's settings.
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself)
16
EN
indicate the type of
u . e i t y u r e c n s s o m o t h w . w w
720P HD WIFI IP CAMERA
In our example, we use www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com
Both addresses need to have been created
beforehand.
To program email alerts for movement detection,
right click a camera in the list at the top right of
the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]".
Then go to "Réseau [Network]", "Paramètres
messagerie [Message settings]":
1
7
Tick the "Activer [Activate]" box to activate
1
email sending
SMTP server: depends on the email provider
2
of address that sends the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider
3
of the address sending the alert. In our
example using gmail, 465
Security: security when connected to the
4
email provider. In our example using Gmail,
TLS
Authentication: indicates whether connection
5
is compulsory (authentication) to send an
email. In our example using Gmail: Yes (in
other words: you cannot send an email
via Gmail if you are not logged into your
account).
receives the alerts.
2 3 4 5 6
8 9