BASETech BTEK07 Notice D'emploi page 16

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket
using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an extended period of time.
• For safety reasons, always unplug the device in case of a thunderstorm.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical
stress. Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify the
mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via
the respective circuit breaker) and then carefully pull the mains plug from the mains socket. Never use
the product if the mains cable is damaged.
• To prevent risks, damaged power cables may only be replaced by the manufacturer, a professional
workshop appointed by the manufacturer, or a similarly qualified person.
• Never plug in or unplug the mains plug when your hands are wet.
• Always turn off the product before disconnecting the mains plug from the wall socket.
• Never leave the product unattended during use.
• Connect the product directly to a wall socket. Do not connect an additional remote switch system, timer
or other devices that would automatically turn on the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
16