Operating Audible Beep; Operating Modeling Lamp; Select Triggering Ways - Starblitz ASPIC Mode D'emploi

Operating Audible Beep

You can turn audible beeper "ON" and "OFF" by pressing the AUDIO button. The spea-
ker symbol will display on screen when the beeper is on. When the beep is active, it
will sound once the flash is recycled and ready to flash.
During recycling, the recycling state is indicated by a series of shaded bars. When the
unit is completely recycled, the numbers of shaded bars reach at maximum.

Operating Modeling Lamp

Shortly press [Mode], brightness of
modeling lamp varies from 6 to 1
and "OFF" in sequence.
Brightness of modeling lamp is ad-
justable in <TTL>, <M> and <Multi>
mode.

Select Triggering Ways

1. Sync cord Connection
The 3.5mm Sync Cord Input on the flash may be used for direct connection to a
camera set to synchronization. A radio slave receiver may also be plugged into the
Input.
Supporting flash mode: <M>
2. 2.4G wireless radio trigger
User SST-818TX TTL radio transmitter to trigger synchronously.
Supporting flash mode: <TTL>,<M>,<Multi>
EN
FR
ES
11