Prepare Flash For Use - Starblitz ASPIC Mode D'emploi

EN

Prepare flash for use

1. Fix Flash on Light Stand
FR
Select a light stand or support system of suitable weight and dimensions to ensure
stable operation of the unit. Rotate knob clockwise to lock flash unit firmly on sup-
port system.
ES
The flash unit includes a 1/4" Tripod head adapter. It applies to fix on camera tripods
or other support system with 1/4" screw.
2. Release Protective Cap
To remove protective cap, push reflector release knob back towards the rear of the
unit and rotate protective cap anti clockwise (Fig 1). Put the protective cap aside.
To avoid deformation of plastic protective cap, always cool down flash unit before
fitting protective cap.
3. Install Standard Reflector
Install standard reflector where the protective cap was before. Align the three pegs
on the reflector with the three slots, press the reflector in and rotate clockwise until
it locks in place(Fig 2 & 3 ).
Always switch off the unit before fitting and changing reflectors.
4. Adjust Flash Light Angel
Rotate regulating screw anticlockwise, adjust the unit to appropriate angle. Rotate
regulating knob clockwise to tight flash head.
5. Install Battery
Push battery forward until hear a clicking sound (Fig. 4).
Switch off power before remove battery. Press down lock button and move it
backward (Fig. 5).
8